Historical Emporium Men’s Double Tooled Leather Western Gun Belt and Holster .44/.45 Cal Review

Bearry Gun Accessories, Maintenance and Storage No Comments

Historical Emporium Men's Double Tooled Leather Western Gun Belt and Holster .44/.45 Cal

  • Leather
  • Imported
  • Our Double Western Holster and Belt, tooled in the heavy-duty “Buscadero” style, will keep you ready on the left and the right
  • Our premium quality tooled leather western drop loop style gun belt includes two matching holsters sized for standard frame revolvers, and fit most barrel lengths 4 to 6 inches
  • Features floral tooling on belt and holsters with ammo loops across the back (sized for .44/.45 caliber ammunition). Includes a leather hammer loop and leg tie to keep your guns secure whether you’re galloping across the plains or taking part in an old-fashioned shootout (guns not included)
  • Belts are sized by hip size, not waist. Measure hips (as pictured) at location and angle you intend to wear the belt. Listed size is at center hole, allowing for 2 inches of adjustability in either direction. Men will need a larger size than their waist
  • NOTE: At Historical Emporium, we are proud of the holsters we offer, and work closely with our manufacturers to ensure that the color, leather grade and manufacturing quality are up to our high standards. These photos were taken at Historical Emporium’s warehouse, with items from our own stock. Historical Emporium does NOT re-sell to any other merchant, and we cannot guarantee the quality unless you select the official Historical Emporium listing at checkout

Sometimes a cowboy just has to speak his mind. But if your horse ain’t moving fast, you’ll want to make sure you are saddled up with a couple reinforcements at your side. Our Double Western Holster and Belt, tooled in the heavy-duty “Buscadero” style, will keep you ready on the left and the right.

Our premium quality tooled leather western drop loop style gun belt includes two matching holsters sized for standard frame revolvers, and fit most barrel lengths 4 to 6 inches. Gun belt is stitched from two 1/8 inch thick leather sections, forming a full 1/4 inch finished belt that will stand up to the rigors of daily use. The belt features beautiful floral tooling on the belt, and ammo loops across the back (sized for .44/.45 caliber ammunition). The holsters have floral tooling and a snap closure. Buckle may vary slightly from image.

Number of ammo loops will vary by belt size.

Produced in Mexico by skilled craftsmen, this south-of-the-border original was ubiquitous in the 1800’s Southwest.

Our gunbelts are sized by hip size, not waist size. Please measure your hips at the location and angle (as pictured) you intend to wear the belt.

Belt measurements are given as of the center hole of the belt, allowing for two inches of adjustability in either direction. Men typically need a larger size than their waist.

See our storefront for more items!

NOTE: At Historical Emporium, we are proud of the holsters we offer, and work closely with our manufacturers to ensure that the color, leather grade and manufacturing quality are up to our high standards. These photos were taken at Historical Emporium’s warehouse, with items from our own stock. Historical Emporium does NOT re-sell to any other merchant, and we cannot guarantee the quality unless you select the official Historical Emporium listing at checkout

LimbSaver Classic Precision-Fit Recoil Pad for Synthetic Stocks Review

Bearry Gun Accessories, Maintenance and Storage No Comments

LimbSaver Classic Precision-Fit Recoil Pad for Synthetic Stocks

    This fits your .
  • Make sure this fits by entering your model number.

  • Model 10011 — Fits Ruger, Sako, Tikka, and Verona models (see product description for details)
  • Easy-to-install recoil pad helps reduce up to 70 percent of felt recoil, increase stability for improved control
  • Incorporates anti-muzzle jump technology for faster target re-acquisition
  • Made from LimbSaver’s proprietary vibration-dampening NAVCOM material
  • Non-slip surface ideal for use in all harsh weather conditions

Designed to specifically fit a wide variety of rifles, shotguns, and muzzleloaders, this LimbSaver Classic Precision-Fit Recoil Pad for Synthetic Stocks reduces up to 70 percent of felt recoil and incorporates anti-muzzle jump technology for faster target re-acquisition. See the following for model compatibility:

  • Model 10003 — Browning A-Bolt (synthetic), and BPS Youth/Ladies (wood); H&R SB2-988 Ultra Slug Hunter; Mossberg ATI Pistol Grip Non-Tactical; Parker Hale 7mm (some wood); Winchester Model 70 and Model 94 (wood)
  • Model 10008 — Browning Gold 12ga/20ga and Silver 12ga (synthetic); Stoeger M2000 (no pistol grip), Model 2000, and P-350 Pump (all syn)
  • Model 10011 — Ruger K77/22 (synthetic); Sako 75 and A7 (syn); Tikka T3 (laminate), T3 Battue Lite (syn), T3 Deluxe & Hunter (wood), and T3 Lite (syn); Verona 20ga. (wood)
  • Model 10012 — Blaser R93 Professional (synthetic)
  • Model 10018 — Model 10018 — H&R Handi-Rifle Straight and Monte Carlo (synthetic)
  • Model 10031 — Thompson Center Arms Black Diamond (wood/synthetic), Encore (wood/syn), Encore Pro Hunter (syn), Omega ML (wood/syn), Triumph (syn), Venture (syn)
  • Model 10101 — Model 10101 — Marlin Model XS7 (synthetic); Remington 11-87 (syn), 1100 12/16ga (syn), 700 ADL/BDL/ML (syn), 710 (syn), 7600 (syn), 770 (syn), 870 12/16ga. (syn), SP-10 (syn), VTR Centerfire (syn)
  • Model 10111 — CVA Wolf ML and Eclipse Hunter ML (synthetic); Remington 700 ADL/BDL 4-15/16” (wood stock) and 721 (wood); Savage Arms (syn); Stevens Model 200 (syn); Stoeger Uplander 12ga SXS Standard (wood); Winchester Model 70 (syn) and Super X 1 (wood)
  • Model 10121 — Mossberg 4-7/8″ synthetic stocks
  • Model 10301 — Browning Gold 10ga. (synthetic); Winchester Model 1300 (syn)
  • Model 10403 — Benelli Tactical Pistol Grip Stocks (bolt-on pad)
  • Model 10404 — Benelli Tactical Pistol Grip Stocks (pop-in pad)

The recoil pad helps increase accuracy of follow-up shots and you’ll enjoy increased control for maximum stability. It installs in seconds and is durably built to be used outdoors in harsh environments. It’s made from LimbSaver’s proprietary NAVCOM technology (Noise and Vibration Control Material), which effectively absorbs a wide range of frequencies to dissipate energy and vibration. This recoil pad also features a no-slip surface that stays in place even in the rain.

Forster Ultra Micrometer Seater Die 308 Winchester Review

Bearry Gun Accessories, Maintenance and Storage No Comments

Forster Ultra Micrometer Seater Die 308 Winchester

    This fits your .
  • Make sure this fits by entering your model number.

  • Die body is made of Polished Steel
  • Micrometer top is made of Aluminum with a hard coat black anodizing making the graduations easier to
  • Ultra (Micrometer) Seating Die
  • The Ultra Seating die allows you to adjust the seating depth to .001″; or even .0005″; increments.
  • If using Forster Dies in a Forster Co-Ax press shellholders are not required since Forster presses d

The Forster Ultra Micrometer Seater Die includes all the popular features of the Bench Rest Seater Die, plus an ultra-accurate micrometer adjustment feature for adjusting bullet seating depth. Seating depth may be adjusted in .001″ or even .0005″ increments. The white hash marks on the dial are great for dialing in the desired seating depth and non-crimping bullet seating die allows the bullet and case to be held in perfect alignment during seating. It is recommended that neck sizers be used only for Bolt Action or single shot rifles. Cartridges for autoloaders, lever action and pump rifles should be full length sized. Shellholder sold separately.

HolsterSmith: Sheath/Holster DIY Combo Kit (Master Series 24) Review

Bearry Gun Accessories, Maintenance and Storage No Comments

HolsterSmith: Sheath/Holster DIY Combo Kit (Master Series 24)

    This fits your .
  • Make sure this fits by entering your model number.

  • (1) Sheath/Holster Molding Press (24 inch model), (1) Master Series Professional Flaring Press
  • (1) KYDEX Rivet/Eyelet Drill (1/4 in.), (1) KYDEX Rivet/Eyelet Drill (3/16 in.)(1) Medium Punch Set (3/16 to 5/16) (8pc), (1) Small Punch Set (5/64 to 11/64) (8pc)
  • (1) Master Series Rivet/Eyelet Setter (1/4 in.), (1) Master Series Rivet/Eyelet Setter (3/16 in.)
  • (1) Thermoform Heat Gun (DEWALT), (1) 3M Item Masking Tape, (1) Infrared Laser Temperature Gun
  • (1) Line-20 Master Series Die (for Line-20 snap sets), (1) Line-24 Master Series Dies (for Line-24 snap sets)

Take your holster and sheath making business/hobby to the next level with our Master Series Thermoform Molding Combo Kit. This is a complete kit and includes all of the tools that you’ll need for creating professional grade custom thermoform sheaths and holsters. With these professional grade tools, you can ramp-up your very own custom holster shop and turn out maximum quality finished sheath and holster products. Our Master Series Thermoform Molding Combo Kit represents the top of the line in sheath and holster making equipment. Get started making your very own professional grade sheaths and holsters today.

ArcEnCiel Tactical Sling Bag Pack Military Shoulder Backpack EDC Molle Assault Range Bags Day Packs with Patch Review

Bearry Gun Accessories, Maintenance and Storage No Comments

ArcEnCiel Tactical Sling Bag Pack Military Shoulder Backpack EDC Molle Assault Range Bags Day Packs with Patch

    This fits your .
  • Make sure this fits by entering your model number.

  • 7.4″ W x 20″ H x 8.2″ D ; High-intensity military-style specifications nylon fabric with waterproof coating: durable, breathable, waterproof and scratch-resistant
  • Well constructed with 6 pockets in different sizes to fully meet your basic outdoor needs. The main compartment can carry about 15 T-shirts; The front upper compartment can be used to hold cellphone, wallet, glasses, etc. The front lower compartment and the side compartment can be used to hold tablet PC, water bottle, umbrella, etc. The open pocket on another side is perfect for hiking poles; The back pocekt is great for hydration bladder up to 2.5 L capacity
  • MOLLE system design can be used in combination with other equipment. It is convenient to mount accessory bag, kettle, hang bag ,glasses, interphone, carabiner, small flashlight and other outdoor equipment in the side and front of the pack
  • Padded & adjustable shoulder strap is tactically worn over one shoulder to give the operator on the go access by rotating the bag from back to front & quick accessibility to the contents of the bag
  • Suitable for varied occasions like travel, hiking, camping, climbing, trekking, running, fishing, cycling, shopping and other outdoor activities. Molle belt on the fornt and two sides for attaching other molle small pouches, water bottle, accessory kits

Spec.-Ops. Brand Rigger’s Belt Review

Bearry Gun Accessories, Maintenance and Storage No Comments

Spec.-Ops. Brand Rigger's Belt

  • Made in USA
  • Life Time Warranty
  • WAIST SIZES: Regular, 24-34 inches; Large, 34-40 inches and X-Large, 40-46 inches.
  • Super strong 1 3/4″ Nylon webbing with over 8000 pound tensile strength.

Features & Benefits: Mil-spec. buckle and “D” ring tie-in anchor point. Super strong 1 ¾” Nylon webbing with over 8000 pound tensile strength. Hypalon abrasion liner minimizes wear to belt at hardware contact points. Excessive & redundant stitching ensures that this belt will hold-up under the worst of situations. Hook & Loop covered to prevent belt from flapping. Heat-sealed bitter end eliminates unraveling. • 100% Made In The U.S.A. – GUARANTEED FOR LIFE! Available in assorted colors.

Red Rock Outdoor Gear Operations Duffle Bag Review

Bearry Gun Accessories, Maintenance and Storage No Comments

Red Rock Outdoor Gear Operations Duffle Bag

    This fits your .
  • Make sure this fits by entering your model number.

  • Seven external first aid/ammo utility pouches
  • Dual pistol mag pouches
  • Padded adjustable shoulder strap
  • Sturdy rubber feet protect bottom of bag
  • Rugged 600 denier PVC lined polyester construction

The Operations Duffle Bag is a 49 Liter shoulder-carry duffle bag. Two Velcro padded dividers (removable) split the 43 Liter main compartment. There are seven external utility pouches ideal for ammo, rifle mags, first aid and radio equipment. Four rubber feet protect the bottom of the bag. The padded shoulder strap is adjustable and can be removed. The Operations Duffle Bag is an ideal carry-all for military, law enforcement and first responders.

Shotgun Lilli Gun Belt – Leather – 45 Caliber – Natural Color with 6″ Right Handed Tooled Holster Combo Review

Bearry Gun Accessories, Maintenance and Storage No Comments

Shotgun Lilli Gun Belt - Leather - 45 Caliber - Natural Color with 6

  • New, Natural Color, Genuine Leather, Right Handed, .45 Caliber Cartridge Gun Belt
  • Right Handed Tooled Holster and .45 Caliber Gun Belt Combination
  • Holster fits up to a 6 inch barrel for single action guns, open at the bottom
  • Gun belts are 2 1/2″ wide. Please note that these belts and holsters are a natural product and may contain imperfections. The belt and holster may not be an exact match.
  • When sizing for a gun belt you should choose one that is 4-6 inches larger than your pants size depending on how loose or tight you would like to wear the belt. Also take into consideration if you want to wear your belt straight or at a slant, then measure as such. When measuring use a cloth measuring tape and make sure you measure just below your waist and right above your hips, approximately where the holster will rest on you.

Color Natural for this 45 cartridge belt and tooled holster combo. Right hand gun holster will hold most single action revolvers with barrels to 6″ and has an attached hammer thong to hold your pistol securely. A gun belt is measured differently from a regular pants belt. One way to measure is to go by your pants size and add 4 to 5 inches. It is important that you measure over your jeans along the line you will be wearing your belt.